I have a 6TB RaidZ ZFS array configured on my nv129 based OpenSolaris filer, and I want to upgrade to FreeNAS as painlessly as possible. I remember betas had warnings that they did not support existing ZFS pools - has this changed? I can't seem to find any official statement that this is possible, and I'd rather not risk my array if possible.
I have backups, so I could start from scratch, I suppose, but I'd rather not. Thoughts?
I'm currently running snv_129 (EON NAS image). I think I have somehow shorted one of my PHYs and I'm trying to debug the issue.
/etc/hostname.rge0 192.168.250.20 /etc/hostname.rge1 192.168.250.21
Router: 192.168.250.1 Network 192.168.250.0/24
I'm trying to switch the active/primary NIC from rge0 to rge1 and am unsure how to go about doing this (I really should have stayed with Linux, which I know a whole lot better).
Anyhow, netstat -rn gives me this:
Dest: default GW: 192.168.250.1 flags: UG
127.0.0.1 127.0.0.1
192.168.250.0 192.168.250.20 Interface: rge0
I cannot ping anything when using rge0 as the primary interface. I don't really have the skills with Solaris to know how to debug this issue.
svcs -a says everything is online, and I can ping 192.168.250.20 whether it's plugged in or not.
Any help would be appreciated, and I'm happy to add more information if necessary
EDIT:
My eventual goal was to do link aggregation. At this point, all I want is to return one of the two interfaces to functioning order - just one.
I've followed some of the advice below. Here is what I've done since last update:
Disable interface 1 in the BIOS. (only one interface detected)
dladm show-phys:
LINK: rge0 MEDIA: ethernet STATE: down SPEED: 1000 DUPLEX: full DEVICE: rge0
ifconfig rge0:
flags: UP BROADCAST MULTICAST IPv4 (RUNNING is not present) inet: 192.168.250.20 netmask ffffff00 broadcast 192.168.250.255 ether ff:7f:7f:7f:7f:7f
Anybody have any ideas on next steps?