I have a TP-LINK T1600G-28TS, and I have 2 different VLANS (10.0.0.0/24 ID 101 and 10.1.1.0/24 ID 102), their IP addresses are defined by the switch's DHCP server. This part is working fine, I can see other devices in the same VLAN, and can't see when they are in different VLANS. I changed the PVID of the ports to their related VLANS.
My need is to provide internet access to both VLANS, using a single port, on this port, I created a third VLAN (ID 200), connected a cable that comes from my gateway server (192.168.10.254) but I don't know how the ports are supposed to be configured (TAGGED, UNTAGGED, ETC), also if I need to make any routes for them, or if I'm missing anything.
INTERFACES:
IP ADDRESS MODE: STATIC IP ADDRESS: 10.0.0.1 MASK: 255.255.255.0
IP ADDRESS MODE: STATIC IP ADDRESS: 10.1.1.1 MASK: 255.255.255.0
IP ADDRESS MODE: DHCP IP ADDRESS: 192.168.10.140 MASK: 255.255.255.0