SilverLight's questions

i configured a proxy server in CentOS server using with squid
i have multiple ips like these :

192.233.76.1 ~ 100 

i've added those ips to my one interface.
so every HTTPS proxy works well -> ip : 443 : username : password
my problem is when i test 192.233.76.2 ~ 100 using with proxifire software the output ip is always 192.233.76.1.
i am using this site for checking output ip : http://whatismyipaddress.com/
how can i fix that problem?
i have my own vds and i have all accesses to it.(using with vmware)

i have remote access to my windows server 2008 r2(DNS-IIS-FTP-MAIL),
please see the link below for my web site :
http://www.intodns.com/polyafzar.com

how can i fix the error below in my server :

ERROR: No reverse DNS (PTR) entries. The problem MX records are:
234.60.7.31.in-addr.arpa -> no reverse (PTR) detected
233.60.7.31.in-addr.arpa -> no reverse (PTR) detected
You should contact your ISP and ask him to add a PTR record for your ips

thanks in advance

i have a web site for download mobile files and there many users in my web site. sometimes i have the error below :
HTTP Error 503 - Service is unavailable

1-so why this error happens and what is that mean?

2-as i know appache free up itself when it's oveloaded, but what about iis?

how can i put some limitations in my server (i have remote access to my server) for prevent this error happening?

a.is limitation of dowload's speed efficient for prevent that error's occur?
how can i do that?
is squid useful for this job or i can do that with another iis extension.

b.is limitation of download's Bandwidth efficient for prevent that error's occur?
how can i do that (with iis or another extension)?

in right side of iis -> configure area -> i found some limits.
what do those limits mean and can i use them for keep my server alive all the time?

EDIT:
after viewing event viewer of windows -> custom views -> server rols -> web server (iis) i figure out there is no error in that area.
but many warnings and information.
the latest warnings and information are like below :
warning

A worker process '2408' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number.

warning

A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '6764'.

warning

A worker process '3232' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number.

warning

A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '3928'.

thanks in advance
best regards

Is there a way to limit download bandwidth (or download speed) for my web site in Windows Server 2008?

I do not want any limitations for viewing my web site and loading pages, just for downloads.

Sometimes I get 503 errors because of downloads and number of users, which I would like to prevent.

i am using windows server 2008 (r2) and CuteFTP Pro 8.3.4 for transfer files to my server.

on windows server i have iis,dns,ftp,websitepanel...

my internet speed is 1mbps and server speed is 5 mbps!

but when i want upload files on server, we have only 20kbps speed!

is there any configuration or setup for ftp(file transfer protocol) SPEED on windows server 2008 (r2)?

or is there any config about cuteftp for solving this issue?

I HAVAE REMOTE ACCESS TO MY SERVER

thanks in advance

Please see the below link :
intoDNS Web Site
How can I solve Recursive Queries error!
the entire error is below :

Recursive Queries I could use the nameservers listed below to performe recursive queries. It may be that I am wrong but the chances of that are low. You should not have nameservers that allow recursive queries as this will allow almost anyone to use your nameservers and can cause problems. Problem record(s) are: 188.138.85.86

Also I have one IP address -> what can I do about ns2 -> are those error about ns2 important for google bots or SEO?

i bought an ip valid from my adsl isp and made a pppoe connection for using that ip in my windows server 2008.(my server)
i want to force that connection to run automatically when log off/on or windows starts!
i made a shortcut of that connection in start up folder of start menu-programs / but does not work when windows starts (before login)!
also i test scheduled task , but it seems in scheduled task we should define time(but we need windows startup option)!!!

how can i do this job in windows server 2008?

I bought a domain from reseller like below :

www.test.com

I want to use this domain as my parent domain.

This domain in the reseller's web site has a control panel that I should set ns1.something.com and ns2.something.com but in those text boxes we can not put any ip-address!

What are these ns1.something.com and ns2.something.com?

I have a server with a valid IP address.

How can I connect that domain to this IP valid of my server (should I do this job in my server or other place - I mean which web site and panel should I use to do that)?

Of the following, which way is better?

1. Install IIS, PHP, MySQL separately on Windows Server 2008 R2 and non R2.
2. Install WAMP server alongside IIS (again in R2 and non R2). Is this possible, and how?

I found some links about this issues, but those manuals were for some years ago. I have some web applications written in both ASP.NET and PHP. How can I use them in Windows Server 2008?

i have sql server 2008 r2 installed on a virtual private network (vps) with one ip valid ...
my sql server instance info for connect on server(vps) is like below :
server type: database engine
server name : ServerComputerName\InstanceName
Authentication : sql server
login : sa
password : blablabla

================================================

how can i connect to that sql server instance from my pc (remotely server access for backup) ?
*which changes are necessary in windows firewall and node32 firewall on server?
*also which changes are necessary in sql server 2008 r2 for remote access?
*which sotware is the best for remotely connect to that instance?

server type: database engine
server name : ????\????
Authentication : sql server
login : sa
password : blablabla

thanks in advance

I'm running a site on a dedicated server:
(vps = virtual private network, with windows server 2008, IIS & DNS has been installed without any configs, have one dedicated IP address)

I am trying to setup DNS correctly for a specific domain (www.mydomain.com).
How do I properly setup the ns1 and ns2 nameservers and web zones for that domain, so its publicly live and viewable?

I'm running Windows Server 2008 r2 as the administrator user.
I am a system web developer and am so sorry for lack of knowledge about this situation, but I want to learn it step by step.

i configured and installed MDaemon in my web server (with iis and dns installed) for getting mail server too.
web admin and web client are working perfect.
my problem is about server firewall and security!

Q#1 :
when both windows firewall and nod 32 are off on server , i can send and recieve emails.
i activated 25 & 110 & 143 port numbers in nod 32 / so when nod 32 firewall is on every thing is ok...
but i want to learn which part of windows firewall should i change for recieve and send emails? (when windows firewall is on i only can send emails and i don't know where can i find incoming emails that have been blocked by windows firewall)

Q#2 :
where can i find incoming emails that have been blocked by windows firewall?

Q#3 :
after making that firewall comfortable for mail server , what can i do about it's security?

thanks in advance

I installed third party application on my Windows 2008 server to turn it into a mail server (MDaemon)...
I filled the info during its wizard very carefully without any changes in its options or preferences!
I configured it's IIS to use webAdmin and webClient and every thing is ok about them...
also this server acts as a web server (IIS and DNS are installed).

I turned my server and my pc firewall off...(both firewalls are node 32)

Executing these commands on the server are ok :

telnet ip-address of server(127.0.0.1 on server) 25  
telnet ip-address of server(127.0.0.1 on server) 110  
telnet ip-address of server(127.0.0.1 on server) 143  

but those commands fail on my local machine far away from that server!
What does that mean and what can I do to fix that?
I am system web developer , so I would appreciate some explanation about this situation!

i designed and developed a web application (works as a windows application) in asp.net with c# ...
now i want to use this application on a local machine instead of previous windows application !
how can i install web server on a local machine (windows 7 or server 2008) for an asp.net web application?
is iis necessary or not ?
if yes where can i find it for windows 7 and how can i fonfigure it for both windows 7 and server 2008?

thanks in advance

Please see this link : Certificate issue on remote desktop

I have 2 PCs with Windows 7 Ultimate... (both are in NETHOME)
PC 1 : computer name = alfa -> (main pc) , IP = 192.168.0.1
PC 2 : computer name = beta-lap ->(laptop) , IP = 192.168.0.2
connection type : cross cable ...

When I want to remote one of these PC's from the other, I get the below error:

Full Title :  
Remote Desktop Connection    
Body Text :  
The remote computer could not be authenticated due to problems with its security certificate. It may be unsafe to proceed.

Certificate name

Name in the certificate from the remote computer:

blablabla

Certificate errors

The following errors were encountered while validating the remote computer's certificate:

The certificate is not from a trusted certifying authority.

Do you want to connect despite these certificate errors?

Don't ask me again for connections to this computer 

I can bypass it by checking despite these certificate errors and view the remote computer, but is this normal?

how can i fix this issue?
Besides why do I have an attention icon on both network connection icons in system tray of both PCs?
What is the problem about this little network?

i really confused about this issue ...

i have some web apps that are using difference .net framework 3.5 + 4

i configured them in iss by setting their asp.net ver...

it seems my configuration in dns and iis are ok - but Server Application Unavailable error comes up many times...

how can i solve this problem ?

for solving that i found the below link :

http://www.bing-solution.com/Forum/yaf_postsm92_Server-Application-Unavailable.aspx#post92

but which ver of aspnet should i uninstall and reinstall?

is there another way for solve this issue?

thanks in advance

i have remote access to my company's server that is using windows server 2003...

some web site (with asp.net) installed on dns and iis...

i am so confused how can i confuge one of this web sites for subdomain - i googled it , but i couldn't understand how figure this out with results...

my dns is like this :

i have three zones in forward lookup :

1-com

mydominname(peter for example)

(sameasparent) -> Host(A)

www -> Host(A)

2-net

3-org

so every thing is ok for peter.com & www.peter.com

now how can i add a subdomain(sub1.peter.com & www.sub1.peter.com) into peter domain?

Q1. the below answer tell us about iis (but what about www in iis)?

Q2.and what about dns configure for a subdomain (with or without www)?

Q3.AFTER DOING DNS & IIS COFIGURATION WHAT SHOULD I DO FOR GETTING RESULTS (SHALL I STAND FOR 1 DAY FOR GEETING RESULTS OR THERE ARE SOME COMMANDS IN CONSOLE FOR DOING IT FASTER)?

Q4.WHAT COMMANDS CAN I USE FOR CHECK MY SUBDOMAIN IN CONSOLE?

i really would be appreciate for helping me step by step.

thanks a lot best regards

How can I send emails (with GMail) with PHPMailer?

I downloaded PHPMailer but it seems there is no documentation for it.

There is no class.phpmailer.php file inside that package. Where is that file ?

Would you please lead me to a solution this file issue?

I want to send emails with GMail in my project, so I should enable OpenSSL (when I checked in phpinfo, that was disabled).

----> OpenSSL support disabled (install ext/openssl) )...

I am using that latest version of WampServer:

DOWNLOAD WampServer 2.1e (32 bits)

 Apache 2.2.17 Php 5.3.5 Mysql 5.5.8
 PhpMyadmin 3.2.0.1 SQLBuddy 1.3.2
 XDebug 2.1.0-5.3 webGrind 1.0 XDC 1.5

My OS is Windows XP.

To install OpenSSL extension I went to this site: http://www.php.net/manual/en/openssl.installation.php

But I could not install OpenSSL. What exactly should I do to install that?

Can anyone lead me step by step how to install ext/openssl?