Robert Foss's questions -server

Robert Foss

Asked: 2012-05-07 10:13:57 +0800 CST

iptables: Port forwarding with masquerading is not working

10

I'm having some issues with my port forwards. NAT seems to work ok and one out of the port forwards seem to work (udp port 7887 to machine 192.168.1.100). But not the others.

I doubt that it matters, but eth1 & eth2 are located on a dualport NIC.

WAN internet access is provided with dhcp, so a solution should be WAN_IP independent if possible.

/opt/firewall.sh

#!/bin/sh

WAN="eth1"
LAN="eth2"

#ifconfig $LAN up
#ifconfig $LAN 192.168.1.1 netmask 255.255.255.0


echo 1 > /proc/sys/net/ipv4/ip_forward
sysctl -w net.ipv4.ip_forward=1

iptables -F
iptables -t nat -F
iptables -t mangle -F
iptables -X

iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP

iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

iptables -A INPUT -i $LAN -j ACCEPT
iptables -A OUTPUT -o $WAN -j ACCEPT
iptables -A OUTPUT -o $LAN -j ACCEPT

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

iptables -A FORWARD -o $LAN -m state --state ESTABLISHED,RELATED -j ACCEPT

iptables -A FORWARD -i $LAN -o $WAN -j ACCEPT
iptables -t nat -A POSTROUTING -o $WAN -j MASQUERADE

# Allow ICMP echo reply/destination unreachable/time exceeded.
iptables -A INPUT -p icmp --icmp-type 0 -j ACCEPT
iptables -A INPUT -p icmp --icmp-type 3 -j ACCEPT
iptables -A INPUT -p icmp --icmp-type 11 -j ACCEPT

# SSH
iptables -t nat -A PREROUTING -p tcp -i $WAN -m multiport --dports 22 -j DNAT --to 192.168.1.250
iptables -A FORWARD -p tcp -i $WAN -o $LAN -d 192.168.1.250 -m multiport --dports 22 -j ACCEPT

# WWW
iptables -t nat -A PREROUTING -p tcp -i $WAN -m multiport --dports 80,443 -j DNAT --to 192.168.1.99
iptables -A FORWARD -p tcp -i $WAN -o $LAN -d 192.168.1.99 -m multiport --dports 80,443 -j ACCEPT

# TOR
iptables -t nat -A PREROUTING -p tcp -i $WAN -m multiport --dports 9001,9030 -j DNAT --to 192.168.1.250
iptables -A FORWARD -p tcp -i $WAN -o $LAN -d 192.168.1.250 -m multiport --dports 9001,9030 -j ACCEPT

# I2P
iptables -t nat -A PREROUTING -p tcp -i $WAN -m multiport --dports 7887 -j DNAT --to 192.168.1.100
iptables -A FORWARD -p tcp -i $WAN -o $LAN -d 192.168.1.100 -m multiport --dports 7887 -j ACCEPT
iptables -t nat -A PREROUTING -p udp -i $WAN -m multiport --dports 7887 -j DNAT --to 192.168.1.100
iptables -A FORWARD -p udp -i $WAN -o $LAN -d 192.168.1.100 -m multiport --dports 7887 -j ACCEPT

iptables -t nat -A PREROUTING -p tcp -i $WAN -m multiport --dports 8887 -j DNAT --to 192.168.1.250
iptables -A FORWARD -p tcp -i $WAN -o $LAN -d 192.168.1.250 -m multiport --dports 8887 -j ACCEPT
iptables -t nat -A PREROUTING -p udp -i $WAN -m multiport --dports 8887 -j DNAT --to 192.168.1.250
iptables -A FORWARD -p udp -i $WAN -o $LAN -d 192.168.1.250 -m multiport --dports 8887 -j ACCEPT

iptables -t nat -L -v

Chain PREROUTING (policy ACCEPT 1047K packets, 80M bytes)
 pkts bytes target     prot opt in     out     source               destination         
    5   232 DNAT       tcp  --  eth1   any     anywhere             anywhere            multiport dports ssh to:192.168.1.250 
    1    60 DNAT       tcp  --  eth1   any     anywhere             anywhere            tcp dpt:www to:192.168.1.99:80 
    0     0 DNAT       tcp  --  eth1   any     anywhere             anywhere            multiport dports 9001,9030 to:192.168.1.250 
    0     0 DNAT       tcp  --  eth1   any     anywhere             anywhere            multiport dports 7887 to:192.168.1.100 
12166 4042K DNAT       udp  --  eth1   any     anywhere             anywhere            multiport dports 7887 to:192.168.1.100 
    0     0 DNAT       tcp  --  eth1   any     anywhere             anywhere            multiport dports 8887 to:192.168.1.250 
    0     0 DNAT       udp  --  eth1   any     anywhere             anywhere            multiport dports 8887 to:192.168.1.250 

Chain POSTROUTING (policy ACCEPT 12313 packets, 4085K bytes)
 pkts bytes target     prot opt in     out     source               destination         
 637K   46M MASQUERADE  all  --  any    eth1    anywhere             anywhere            

Chain OUTPUT (policy ACCEPT 395 packets, 62752 bytes)
 pkts bytes target     prot opt in     out     source               destination

iptables -L -v

Chain INPUT (policy DROP 9336 packets, 846K bytes)
 pkts bytes target     prot opt in     out     source               destination         
    1    76 ACCEPT     all  --  lo     any     anywhere             anywhere            
  467 55711 ACCEPT     all  --  eth2   any     anywhere             anywhere            
   64  5598 ACCEPT     all  --  any    any     anywhere             anywhere            state RELATED,ESTABLISHED 
    0     0 ACCEPT     icmp --  any    any     anywhere             anywhere            icmp echo-reply 
   18  1796 ACCEPT     icmp --  any    any     anywhere             anywhere            icmp destination-unreachable 
    0     0 ACCEPT     icmp --  any    any     anywhere             anywhere            icmp time-exceeded 

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
60586   29M ACCEPT     all  --  any    eth2    anywhere             anywhere            state RELATED,ESTABLISHED 
70888  126M ACCEPT     all  --  eth2   eth1    anywhere             anywhere            
    0     0 ACCEPT     tcp  --  eth1   eth2    anywhere             192.168.1.250       multiport dports ssh 
    0     0 ACCEPT     tcp  --  any    any     anywhere             192.168.1.99        tcp dpt:www state NEW,RELATED,ESTABLISHED 
    0     0 ACCEPT     tcp  --  eth1   eth2    anywhere             192.168.1.250       multiport dports 9001,9030 
    0     0 ACCEPT     tcp  --  eth1   eth2    anywhere             192.168.1.100       multiport dports 7887 
  646  310K ACCEPT     udp  --  eth1   eth2    anywhere             192.168.1.100       multiport dports 7887 
    0     0 ACCEPT     tcp  --  eth1   eth2    anywhere             192.168.1.250       multiport dports 8887 
    0     0 ACCEPT     udp  --  eth1   eth2    anywhere             192.168.1.250       multiport dports 8887 

Chain OUTPUT (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
  157 13421 ACCEPT     all  --  any    lo      anywhere             anywhere            
   76  9678 ACCEPT     all  --  any    eth1    anywhere             anywhere            
  159 26706 ACCEPT     all  --  any    eth2    anywhere             anywhere

Access testing:

 me@external-host $ ssh WAN_IP        
 ssh: connect to host WAN_IP port 22: Connection timed out

 me@external-host $ wget WAN_IP                
 --2012-05-06 15:46:50--  http://WAN_IP/
 Connecting to |WAN_IP|:80... failed: Connection timed out.

Access testing logs:

 May  8 21:04:18 router kernel: [11692.837693] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=35931 DF PROTO=TCP SPT=52319 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:19 router kernel: [11693.837174] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=24784 DF PROTO=TCP SPT=52320 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:20 router kernel: [11694.835943] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=57280 DF PROTO=TCP SPT=52321 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:21 router kernel: [11695.835159] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=10721 DF PROTO=TCP SPT=52322 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:22 router kernel: [11696.833763] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=19002 DF PROTO=TCP SPT=52323 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:23 router kernel: [11697.832960] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=17468 DF PROTO=TCP SPT=52324 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:24 router kernel: [11698.831733] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=32834 DF PROTO=TCP SPT=52325 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:25 router kernel: [11699.830620] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=28252 DF PROTO=TCP SPT=52326 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:26 router kernel: [11700.829493] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=43537 DF PROTO=TCP SPT=52327 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0 
 May  8 21:04:27 router kernel: [11701.829118] FOWARD: IN=eth1 OUT=eth2 SRC=130.235.35.233 DST=192.168.1.99 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=55720 DF PROTO=TCP SPT=52328 DPT=80 WINDOW=14600 RES=0x00 SYN URGP=0

Robert Foss

Asked: 2012-01-06 05:47:35 +0800 CST

OpenBSD 5.0 pf with NAT & Port Forwarding

0

Port forwarding does not seem to work properly, incoming connections apparently are blocked.

Is there something wrong with my pf.conf?

# Performance limits
set limit states 200000
set limit src-nodes 200000
set limit frags 1000000
set limit tables 20000
set limit table-entries 40000000

set skip on lo

ext_if = "re0"
int_if = "em0"

# Add UPnP rules
#anchor miniupnpd

server = "192.168.1.250"
server_tcp = "{22, 8887, 9001, 9030}"
server_udp = "{8887, 9001, 9030}"

wwwserver = "192.168.1.99"
wwwserver_tcp = "{80, 443}"
wwwserver_udp = "{}"

x79 = "192.168.1.100"
x79_tcp = "{18887 }" 
x79_udp = "{18887 }"

t420 = "192.168.1.251"
t420_tcp = "{9222 }"
t420_udp = "{9222 }"

## Bad syntax warnings.. ignore for the moment
#all_tcp = "{ $server_tcp $wwwserver_tcp $x79_tcp $t420_tcp }"
#all_udp = "{ $server_udp $wwwserver_udp $x79_udp $t420_udp }"
#pass out on $ext_if proto tcp to port $all_tcp
#pass out on $ext_if proto udp to port $all_udp


# Default rules
pass #to establish keep-state
block in on $ext_if
#pass in keep state
#pass out keep state


# Nat
pass out on $ext_if from $int_if:network to any nat-to ($ext_if) 

pass in on $ext_if proto tcp from any to any port $server_tcp rdr-to $server
pass in on $ext_if proto udp from any to any port $server_udp rdr-to $server

pass in on $ext_if proto tcp from any to any port $wwwserver_tcp rdr-to $wwwserver
#pass in on $ext_if proto udp from any to any port $wwwserver_udp rdr-to $wwwserver

pass in on $ext_if proto tcp from any to any port $x79_tcp rdr-to $x79
pass in on $ext_if proto udp from any to any port $x79_udp rdr-to $x79

pass in on $ext_if proto tcp from any to any port $t420_tcp rdr-to $t420
pass in on $ext_if proto udp from any to any port $t420_udp rdr-to $t420

Robert Foss

Asked: 2011-09-21 15:08:12 +0800 CST

What item-key to monitor when looking for CPU interrupts in Zabbix 1.8.2

3

What is the proper item-key to monitor when looking for CPU interrupts caused by NICs.

iptables: Port forwarding with masquerading is not working

OpenBSD 5.0 pf with NAT & Port Forwarding

What item-key to monitor when looking for CPU interrupts in Zabbix 1.8.2

Can you pass user/pass for HTTP Basic Authentication in URL parameters?

Ping a Specific Port

Check if port is open or closed on a Linux server?

How to automate SSH login with password?

How do I tell Git for Windows where to find my private RSA key?

What's the default superuser username/password for postgres after a new install?

What port does SFTP use?

Command line to list users in a Windows Active Directory group?

What is a Pem file and how does it differ from other OpenSSL Generated Key File Formats?

How to determine if a bash variable is empty?