Marcus Griep's questions

I have two ethernet interfaces in my computer, which is running Ubuntu 9.04. Both interfaces sport static IPs, but use separate gateways. My /etc/network/interfaces file looks something like this:

auto eth0 eth1
iface eth0 inet static
  address 10.0.0.5
  netmask 255.255.255.0
  gateway 10.0.0.1

iface eth1 inet static
  address 192.168.2.5
  netmask 255.255.255.0
  gateway 192.168.2.1

I want to have all traffic going to the internet-at-large run through eth0, but it seems to want to go through eth1. Is there a way that I can channel my general outbound traffic through eth0 instead and only use eth1 for traffic to its subnet?

The answer should be persistent; that is to say, it should survive reboot without a superuser needing to run a command after restart.

EDIT: as requested, here is the output of my route -n command:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth1
0.0.0.0         192.168.2.1     0.0.0.0         UG    100    0        0 eth1
0.0.0.0         10.0.0.1        0.0.0.0         UG    100    0        0 eth0

I am currently running Ubuntu 9.04, Jaunty, and have had some issues that caused a few kernel panics to crop up. These panics cause the system to dump a bunch of information to the terminal and hang.

More often than not, these happen while I am away from the system. This means that the system sits idle until I come to the terminal, see that it has had a kernel panic, and restart the system.

Is there a way to automate the restart with Linux? I know that with a Windows BSOD, there is an option to automatically reboot after the core dump has occurred. Is there a similar option for Linux?